Resilient
Products
HENRY® 695
High RH Vinyl Flooring Adhesive
- Moisture resistant up to 99% RH
- Ideal for the installation of LVT, plank and vinyl-backed sheet flooring
- Use as a pressure-sensitive or wet-set adhesive
Information HENRY® 695
A solvent-free acrylic polymer-based adhesive. Its excellent resistance against damage from vinyl plasticizer migration make it ideal for LVT and other types of vinyl-backed flooring. Sheet flooring installers may choose to lay in and re-position the floor covering while the adhesive remains in its initial wet state, while the installers of vinyl tiles and planks often prefer to lay in for up to 4 hours while the adhesive is in a dry-to-the-touch (pressure-sensitive) state. Its overall versatility and outstanding bond strength make HENRY® 695 a leading choice for both commercial and residential environments.
Available in 1-gallon and 4-gallon containers.
Key Features
- Designed for installing LVT as well as vinyl sheet goods, see “Use for” section for complete listing of recommended flooring types.
- 99% RH moisture resistant*
- May be used in a dry-to-the-touch (pressure-sensitive) state, or as a wet-set.
- Excellent resistance against plasticizer migration
- 4 hours of Working Time available if needed
Standards
Greenline
SystemOne™
FloorScore®
HENRY’S Best 10-Year
Technical Data HENRY® 695
Use for:
When the specific guidelines for installation from the flooring manufacturer call for a fully adhered glue-down installation, use HENRY® 695 to install the following types of vinyl-backed flooring:
- LVT (luxury vinyl tile & plank)
- SVT (solid vinyl tile & plank)
- Homogeneous sheet vinyl
- Heterogeneous sheet vinyl
- Fiberglass encapsulated (cushion-backed) sheet vinyl
- Felt-backed sheet vinyl
- VCT (vinyl composition tile)
- VET (vinyl enhanced tile)
All substrates, all recommended flooring types:
Square-notch 1/16” D x 1/16” W x 1/16” A
Up to 250 sq. ft. / per 1 gal. (up to 1,000 sq. ft. per 4 gal. pail)
Up to 23.2 sq. m/ per 3.78 L. (up to 92.9 sq. m per 15.14 L pail)
Alternate trowel for extremely flat substrates:
U-notch 1/32” D x 1/16” W x 5/64” A
225 – 275 sq. ft. / per 1 gal. (900 – 1,100 sq. ft. per 4 gal. pail)
20.9 – 25.5 sq. m /per 3.78 L (83.6 – 102.1 sq. m per 15.14 L pail)
Note – minor imperfections on the surface of the substrate, such as concrete trowel marks and pitting, must not exceed the 1/32” (0.7 mm) height of the adhesive trowel ridge.
Shelf life is 1 year, if unopened.
VOC: 2.3 g/L, SCAQMD 1168
For complete product technical information, click on the Downloads tab and open the Technical Data download.
Downloads HENRY® 695
BIM Objects HENRY® 695
Calculator HENRY® 695
Information HENRY® 695
A solvent-free acrylic polymer-based adhesive. Its excellent resistance against damage from vinyl plasticizer migration make it ideal for LVT and other types of vinyl-backed flooring. Sheet flooring installers may choose to lay in and re-position the floor covering while the adhesive remains in its initial wet state, while the installers of vinyl tiles and planks often prefer to lay in for up to 4 hours while the adhesive is in a dry-to-the-touch (pressure-sensitive) state. Its overall versatility and outstanding bond strength make HENRY® 695 a leading choice for both commercial and residential environments.
Available in 1-gallon and 4-gallon containers.
Key Features
- Designed for installing LVT as well as vinyl sheet goods, see “Use for” section for complete listing of recommended flooring types.
- 99% RH moisture resistant*
- May be used in a dry-to-the-touch (pressure-sensitive) state, or as a wet-set.
- Excellent resistance against plasticizer migration
- 4 hours of Working Time available if needed
Standards
Greenline
SystemOne™
FloorScore®
HENRY’S Best 10-Year
Technical Data HENRY® 695
Use for:
When the specific guidelines for installation from the flooring manufacturer call for a fully adhered glue-down installation, use HENRY® 695 to install the following types of vinyl-backed flooring:
- LVT (luxury vinyl tile & plank)
- SVT (solid vinyl tile & plank)
- Homogeneous sheet vinyl
- Heterogeneous sheet vinyl
- Fiberglass encapsulated (cushion-backed) sheet vinyl
- Felt-backed sheet vinyl
- VCT (vinyl composition tile)
- VET (vinyl enhanced tile)
All substrates, all recommended flooring types:
Square-notch 1/16” D x 1/16” W x 1/16” A
Up to 250 sq. ft. / per 1 gal. (up to 1,000 sq. ft. per 4 gal. pail)
Up to 23.2 sq. m/ per 3.78 L. (up to 92.9 sq. m per 15.14 L pail)
Alternate trowel for extremely flat substrates:
U-notch 1/32” D x 1/16” W x 5/64” A
225 – 275 sq. ft. / per 1 gal. (900 – 1,100 sq. ft. per 4 gal. pail)
20.9 – 25.5 sq. m /per 3.78 L (83.6 – 102.1 sq. m per 15.14 L pail)
Note – minor imperfections on the surface of the substrate, such as concrete trowel marks and pitting, must not exceed the 1/32” (0.7 mm) height of the adhesive trowel ridge.
Shelf life is 1 year, if unopened.
VOC: 2.3 g/L, SCAQMD 1168
For complete product technical information, click on the Downloads tab and open the Technical Data download.