Improve SEO

Products

HENRY® 248 SeamPro™

Carpet Seam Adhesive

  • Extremely versatile: for all carpet backings including vinyl
  • High tensile strength: seams will not pull apart
  • Dries clear: transparent seams
HENRY 248
Images and Videos
  • HENRY 248

Information HENRY® 248 SeamPro™

HENRY® 248 SeamPro™ Carpet Seam Adhesive is a high-strength, versatile carpet seam adhesive designed for all carpet backings, including vinyl.

Key Features

  • Extremely versatile: for all carpet backings, including vinyl
  • High tensile strength: seams will not pull apart
  • Dries clear: transparent seams
  • Easy cleanup: cleans up with water

Standards

SystemOne
Ready to Use / Premixed
CRI Green Label Plus
HENRY’S Best 10-Year

Technical Data HENRY® 248 SeamPro™

For all commercial carpet backings

Installation

  • Remove the screw cap of the seam sealer and replace it with the nozzle applicator tip cap.
  • Cut tip to allow application of a 1/8″ bead.
  • Apply a 1/8″ continuous bead of seam adhesive to the edge of the carpet where the face yarns enter the backing.
  • Apply adhesive to one edge only.
  • After applying the bead, butt both edges of the carpet together while the adhesive is still wet (approximately 5-10 minutes).

Shelf life is 1 year, if unopened.
VOC: 30 g/L, calculated and reported, SCAQMD 1168

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Information HENRY® 248 SeamPro™

HENRY® 248 SeamPro™ Carpet Seam Adhesive is a high-strength, versatile carpet seam adhesive designed for all carpet backings, including vinyl.

Key Features

  • Extremely versatile: for all carpet backings, including vinyl
  • High tensile strength: seams will not pull apart
  • Dries clear: transparent seams
  • Easy cleanup: cleans up with water

Standards

SystemOne
Ready to Use / Premixed
CRI Green Label Plus
HENRY’S Best 10-Year

Technical Data HENRY® 248 SeamPro™

For all commercial carpet backings

Installation

  • Remove the screw cap of the seam sealer and replace it with the nozzle applicator tip cap.
  • Cut tip to allow application of a 1/8″ bead.
  • Apply a 1/8″ continuous bead of seam adhesive to the edge of the carpet where the face yarns enter the backing.
  • Apply adhesive to one edge only.
  • After applying the bead, butt both edges of the carpet together while the adhesive is still wet (approximately 5-10 minutes).

Shelf life is 1 year, if unopened.
VOC: 30 g/L, calculated and reported, SCAQMD 1168

For complete product technical information, click on the Downloads tab and open the Technical Data download.