DIRECTIONS:
NOTE: Although HENRY 972 has been tested on major wood flooring manufacturers’ products, user should test a small area first. For best results, remove HENRY 971 PlankPro™ Moisture-Cured Urethane Wood Adhesive while it is still wet. Use a cotton cloth dampened with HENRY 972 and follow with a clean, dry cotton cloth. Cured HENRY 971 will be more difficult to remove. Using a cotton cloth, apply a small amount of the HENRY 972 to the spot to be cleaned. Allow a few minutes for the adhesive to soften, then wipe with a clean, dry cotton cloth. Repeat this procedure as required to completely remove the adhesive. Do not use for personal cleanup.

WARNINGS:
Carefully read and follow all cautions and warnings on the product label. Refer to the Material Safety Data Sheet for additional product information.