|
|
|
|
Product
Info • Technical
Data
Installation
Instructions
MSDS: USA: English
/ Spanish
• Canada: English
/ French
|
HENRY
440 Cove Base Adhesive
|
|
|
|
| Typical
Use: |
Traffic
Type: |
| Installation
of rubber and vinyl cove base. |
N/A |
| Bonds: |
Bonds
To: |
| Rubber
and vinyl cove base. |
Concrete,
concrete block, gypsum drywall, plaster, wood, plywood,
brick and plastic laminate, and abraded glazed or metal
surfaces on all grade levels as recommended by the cove
base manufacturer. |
| Warranty: |
| HENRY's Best 10 Year Warranty |
Back
to Top
|
TECHNICAL
DATA
| Base: |
Water-based/rubber-resin |
| Color: |
Tan |
| Taggant
Color: |
Yellow/Orange |
| Open
Time: |
None
- lay in immediately |
| Working
Time: |
30
minutes NOTE: Working times vary based on job conditions,
substrates, temperature and humidity. |
| Size: |
11
oz, 30 oz, Quart, Gallon, 4 Gallon |
| Shipping
Unit: |
11
oz: 24 cartridges/ctn
30 oz: 12 cartridges/ctn
Quart: 12 quarts/ctn
Gallon: 4 gallons/ctn
4 Gallon: 1 pail |
| Weight
Per Gallon: |
9.13
lbs |
| Quantity
Per Pallet: |
11
oz: 64 ctns
30 oz: 60 ctns
Quart: 40 ctns
Gallon: 30 ctns
4 Gallon: 48 pails |
| Shelf
Life: |
One
year if not opened |
| Freeze-Thaw
Stable: |
To
10°F (-12°C) - Avoid low temperatures or multiple
freeze-thaw cycles |
| UPC
Information: |
11
oz: 0-81833-44004-1
30 oz: 0-81833-44005-8
Quart: 0-81833-44030-0
Gallon: 0-81833-44040-9
4 Gallon: 0-81833-44095-9 |
Back
to Top
INSTALLATION
INSTRUCTIONS
|
DIRECTIONS:
Refer to cove base manufacturer’s
specific recommendations. Condition the area to be installed,
adhesive and cove base at 65°F (18°C) or above
for 48 hours before, during and 48 hours after installation.
Walls must be sound, smooth, dry, clean and free of
dirt, wax, polish, paint and all other foreign matter
that would interfere with a good bond.
- Stir
any liquid on the surface into the adhesive.
- Use
recommended trowel to spread adhesive on the back
of cove base or directly to the substrate. Stay 1/8"
away from top of cove base to prevent adhesive oozing.
- Place
cove base into position. Butt joints neatly.
- Using
a hand roller, roll toward the previously installed
section.
|
Application
|
Recommended
Trowel
|
Coverage
|
| 2
- 2 1/2" rubber or vinyl cove base |
|
310-340 lin ft/gal
|
| 4"
rubber or vinyl cove base |
|
220-240 lin ft/gal
|
| 6"
rubber or vinyl cove base |
|
165-180 lin ft/gal
|
|
Application
|
Bead
|
Coverage
|
| 4"
rubber or vinyl cove base |
1/8"
bead
|
27
lin ft / 11 oz cartridge
90 lin ft / 30 oz cartridge
|
Click
on the icons above to calculate the amount of product
you need!
CLEANUP:
- Wet
Adhesive: Clean, white
cloth dampened with soapy water.
- Dried
Adhesive: Clean, white
cloth dampened with mineral spirits; carefully following
warnings on the container.
WARNINGS:
Carefully read and follow all cautions and warnings
on the product label. Refer to the Material
Safety Data Sheet for additional product information.
|
Back
to Top
|
|
