|
|
|
|
Product
Info • Technical
Data
Installation
Instructions
MSDS:
USA: English
/ Spanish
• Canada: English
/ French
|
HENRY
356 MultiPro Premium Multipurpose Flooring Adhesive
-
Extremely
Versatile
-
Strong
Initial Grab
-
Long
Working Time
-
Excellent
Rebond
-
Short
Open Time
-
Nonstaining
-
Solvent-Free
& Low Odor
-
Excellent
Trowelability
|
|
|
|
| Typical
Use: |
Traffic
Type: |
| Installation
of commercial and residential felt-back sheet flooring,
linoleum and almost all commercial carpet. |
Moderate
to Heavy Residential or Commercial |
| Bonds: |
Bonds
To: |
| Felt-back
sheet, linoleum, most commercial carpet |
Concrete,
underlayments, wood substrates, terrazzo, existing resilient
flooring |
| Warranty: |
| HENRY's Best 10 Year Warranty |
Back
to Top
|
TECHNICAL
DATA
| Base: |
Water-based/rubber-resin |
| Color: |
Tan |
| Taggant
Color: |
Yellow/Orange |
| Next
Generation: |
Solvent-free,
nonflammable |
| Open
Time: |
0-20
minutes (depending on substrate) |
| Working
Time: |
40
minutes NOTE: Working times vary based on job conditions,
substrates, temperature and humidity. |
| Size: |
Quart,
Gallon, 4 Gallon |
| Shipping
Unit: |
Quart:
12 quarts/ctn
Gallon: 4 gallons/ctn
4 Gallon: 1 pail |
| Weight
Per Gallon: |
10.4
lbs |
| Quantity
Per Pallet: |
Quart: 40 ctns
Gallon: 30 ctns 4 Gallon: 48 pails |
| Shelf
Life: |
One
year if not opened |
| Freeze-Thaw
Stable: |
To
10°F (-12°C) - Avoid low temperatures or multiple
freeze-thaw cycles |
| UPC
Information: |
Quart: 0-81833-35630-4
Gallon: 0-81833-35640-3
4 Gallon: 0-81833-35695-3 |
Back
to Top
INSTALLATION
INSTRUCTIONS
|
DIRECTIONS:
Refer to flooring manufacturer’s specific recommendations.
Condition the area to be installed, adhesive and flooring
at 65°F (18°C) or above for 48 hours before,
during and 48 hours after installation. Floor must be
sound, smooth, dry, clean and free of excessive moisture
or alkali. Remove dirt, wax, loose paint and all other
foreign matter that would interfere with a good bond
such as curing agents and sealers.
- Stir
any liquid on the surface into the adhesive.
- Full
spread adhesive using recommended trowel. NOTE: Recommended
trowel sizes are guidelines only, and are minimum
requirements. Rough, porous concrete and heavily textured
carpet backings may require deeper notches. A 100%
transfer of adhesive into the carpet backing, while
maintaining full coverage of the substrate, must be
obtained.
- No
open time required over concrete. For all other substrates,
allow adhesive to set open for 10-20 minutes. Do not
let adhesive skin over.
- After
appropriate open time, install floor. Within 40 minutes,
cut, fit and reposition as recommended by the flooring
manufacturer.
- Roll
floor in both directions with a 75-100 lb. roller
and seal seams as recommended by the flooring manufacturer.
Stiff carpets should be rolled again after 2 hours.
Restrict heavy traffic over carpet for 24-48 hours.
- Protect
carpet from exposure to water from cleaning and other
sources for a minimum of 30 days after installation.
|
Application
|
Recommended
Trowel
|
Coverage
|
| Felt-back
sheet flooring, linoleum, cork sheet |
|
140-160 sq. ft.
(16-18 sq yds/gal)
|
| Latex
and urethane foam backed carpets |
|
108-125 sq. ft.
(12-14 sq yds/gal)
|
| Carpet |
|
90-108 sq. ft.
(10-12 sq yds/gal)
|
| Felt-back
sheet flooring over porous subfloors |
|
125-150 sq. ft.
(14-17 sq yds/gal)
|
| Felt-back
sheet flooring over nonporous subfloors |
|
225-275 sq. ft.
(25-31 sq yds/gal)
|
Click
on the icons above to calculate the amount of product
you need!
CLEANUP:
- Wet
Adhesive: Clean, white
cloth dampened with soapy water.
- Dried
Adhesive: Clean, white
cloth dampened with mineral spirits; carefully following
warnings on the container.
WARNINGS:
Carefully read and follow all cautions and warnings
on the product label. Refer to the Material
Safety Data Sheet for additional product information.
|
Back
to Top
|
|
