HENRY® 430 ClearPro™ Clear VCT Floor Adhesive
HENRY 430 ClearPro is a premium, clear thin-spread adhesive designed to install vinyl composition tile (VCT) in residential and commercial installations.
Superior Moisture Resistance!!
Up to 90% RH and 8 Lb. CACL
(see Technical Update below for detailed requirements)
HENRY 430 ClearPro is a premium, clear thin-spread adhesive designed to install VCT in residential and commercial installations.
Porous:Concrete, cementitious underlayments, suspended APA grade underlayment plywood, underlayment board, and radiant heated subfloors where temperatures do not exceed 85°F (29°C) on all grade levels. Can also be used over properly primed gypsum underlayments (above grade only).
Non-porous:Terrazzo; ceramic tile; certain epoxy coatings; existing, fully adhered, non-cushion backed resilient, and existing “cutback” adhesive on all grade levels.
1/32” D x 1/16” W x 5/64” A
300-350 sq. ft./gal.
(27-32 sq. m./gal.)Warranty:
10-Year Limited Warranty. For complete warranty details please contact our Customer Service Center 1-800-232-4832.Warnings:
Carefully read and follow all cautions and warnings on the product label. Refer to the Material Safety Data Sheet for additional product information. Tech Support:
Click Below for Technical and Specification Documents:Tech Info & Installation (English)Tech Info & Installation (Español)Tech Info & Installation (Français)TECHNICAL UPDATEMSDS USA and Canada (English)MSDS (Español)MSDS Canada (Français)Back to Product ListBack to Top