HENRY® 117
Multipurpose Construction Adhesive

• High Strength
• Fast Setting
• Moisture- and Alkali-resistant
• Non-staining

Applications:

USE ONLY FOR wood wall paneling, pre-decorated wallboard, plywood, gypsum drywall, wood or metal moldings, furring strips, wall decorations, particleboard, hardboard, ceramic tile repairs, and metal fixtures.  DO NOT USE FOR WOOD FLOORING.  When installing polystyrene foam insulation, surface temperature should not exceed 90°F (32°C) or etching of foam may result.

Bonds To:

Concrete, wood or metal framing studs, furring strips, wood, dry plaster, and gypsum drywall on all grade levels as recommended by the panel manufacturer.  When installing over below-grade concrete where moisture can penetrate from the back, attach furring strips with mechanical fasteners and adhesive, and then adhere panels.

Trowel Recommendation:

V-Notch
1/4” D x 1/4” W x 3/4” A
50-60 sq. ft./gal.

Warranty:

W.W. Henry Company warrants that HENRY 117 will not break down or lose its cohesive strength due to manufacturing or formulation defects for 10 years from the date of installation if used for its stated purpose and applied in accordance with the instructions, subject to certain exclusions and limitations set forth in the warranty. 

Warnings:

Carefully read and follow all cautions and warnings on the product label.  Refer to the Material Safety Data Sheet for additional product information. 


Tech Support:  800.232.4832