HENRY® 351 FastPro™
Fast Grab, Pro Grade Carpet Adhesive
A premium, installer-grade fast-grab carpet adhesive for use in moderate-to heavy-traffic areas.
Applications:
HENRY 351 FastPro Fast Grab Carpet Adhesive is a premium, installer-grade adhesive for use in the installation of most commercial carpets in moderate- to heavy-traffic areas.
Bonds To:
HENRY 351 FastPro Fast Grab Carpet Adhesive bonds most carpet backings, including jute, polypropylene (ActionBac™), latex unitary, urethane foam, unitary ActionBac, hot melt, and latex foam-backed and nonbacked needle-punched to concrete, underlayments, wood substrates, terrazzo, and existing resilient on all grade levels as recommended by the carpet manufacturer.
Trowel Recommendations:
Latex- and urethane foam-backed carpets
V-Notch
3/32”D x 3/32” W x 3/32” A
144-162 sq. ft./gal
(16-18 sq. yd./gal)
Cushion to substrate (permanent)
Sq-Notch
1/16” D x 1/16” W x 1/16” A
144-162 sq. ft./gal
(16-18 sq. yd./gal)
Carpet to cushion (Double glue-down)
U-Notch
3/16” D x 1/8” W x 1/8” A
54-72 sq. ft./gal
(6-8 sq. yd./gal.)
Other recommended carpet backings
V-Notch
1/8” D x 1/8” W x 1/16” A
90-108 sq. ft./gal.
(10-12 sq. yd./gal.)
Warranty:
The W.W. Henry Company warrants that HENRY 351 will not break down or lose its cohesive strength due to manufacturing or formulation defects for 10 years, subject to certain exclusions and limitations set forth in the warranty, if used for its stated purpose and applied in accordance with the stated instructions.
Warnings:
Carefully read and follow all cautions and warnings on the product label. Refer to the Material Safety Data Sheet for additional product information.
Tech Support: 800.232.4832
Click Below for Technical and Specification Documents:Tech Info & Installation (English)Tech Info & Installation (Español)Tech Info & Installation (Français)MSDS USA/Canada (English)MSDS Canada (Français)MSDS USA (Español)Back to Product ListBack to Top
